机械专业论文翻译片段


About Sheet Metal Fabrication Services

Sheet metal fabrication services providers manufacture components by cutting, bending, rolling, forming, stamping and welding sheet metal. Components manufactured through sheet metal fabrication services are used in a variety of applications such as enclosures, computer equipment, HVAC components, kitchen and sanitary equipment, machine tools and other industrial applications. Sheet metal fabrication services include a diverse range of processes used to fashion sheet metal into usable products. These processes may be broken down into three rough categories, cutting, forming, and finishing services.

Sheet metal cutting services includes a number of techniques used to cut metal into smaller pieces so that it can be molded or formed into components. Common types of sheet metal cutting involve shearing, electrical discharge machining (EDM), laser cutting, water jet and abrasive cutting. Shearing uses a specialized machine to cut sheet metal by applying shear stress. This process is used to cut large sheets of metal into smaller parts. Laser cutting machines use laser light to cut or etch holes or profiles. Laser cutting machines are very precise programmable pieces of equipment. Water jets and water abrasive jets rely on highly pressurized water (20,000 - 60,000 psi) flowing through a nozzle or "jewel" approximately 0.010" in diameter. Advantages include almost no material heating during cutting, low side loads, and ability to achieve complex shapes and tight inside radii. Low fixturing costs and fast setup and programming times make this process very suitable for prototypes or short runs. It is most widely used for two-dimensional cutting; three-dimensional machining is possible in specialty applications

Wire electrical discharge machining (EDM) equipment is used to cut conductive materials using a thin electrode. The electrode is a thin wire (typically .004"-.012") that follows a programmed path. The wire does not physically contact the part. It is charged to a certain level and surrounded by de-ionized water. A spark is generated that jumps the gap and melts a small amount of material on the part.

Sheet metal forming processes include those actions used fashion metal into specific shapes or semi-finished pieces. Common techniques include bending and forming, rolling, stamping, punching, welding, and hardware and fastener creation. Bending and forming processes are used to shape the sheet metal to its final shape. In the rolling process, a series of roll stands is used to progressively shape or bend a strip of flat-rolled metal to a desired cross section. Stamping is the process of impressing surface definition and three-dimensional designs onto materials with pressurized tools and dies. Punching is the process of punching holes in the sheet metal. Welding is the joining of metals and metal parts by melting and re-forming a metal bond between materials, with or without additional filler metal. Hardware and fastener creation is the capability to supply and integrate hardware such as handles, latches and threaded, self-clinching fasteners used to provide threads in sheet metal that is too thin or soft to be tapped.

论文翻译服务说明

论文翻译价格：
论文全文翻译：16元/100汉字（1000字以上）
论文摘要翻译：20元/100汉字（1000字以下）

论文翻译时间：
3000字以内的论文翻译在48小时之内完成，每多出3000字，需要多出24小时的翻译时间。

韦氏翻译提供的论文翻译片段样稿及论文翻译专业排序：(按照我们已完成的论文翻译的数量排序)
１、计算机专业论文翻译
２、通讯专业论文翻译
３、财务专业论文翻译
４、金融专业论文翻译
５、MBA专业论文翻译
６、医学专业论文翻译
７、法律专业论文翻译
８、市场营销专业论文翻译
９、房地产专业论文翻译
１０、教育专业论文翻译
１１、机械专业论文翻译
１２、化工专业论文翻译